Set the target price from your selling plan, then work backward to a target purchase cost that preserves your planned margin. For a toy buyer, target price is the market-facing sales goal; target purchase cost is the supplier-facing buying ceiling, not the factory's internal production cost. Keep all three figures separate. Use the purchase ceiling to assess quotations, let the supplier assess manufacturing feasibility, and treat a target as agreed only after written acceptance against the specified SKU, revision, quantity, and commercial terms.
The task is to make each SKU financially workable before quoting or sampling—not to turn a retail price ambition into an unsupported factory-cost demand. This guide covers target setting, cost ownership, and confirmation. It does not calculate tariff rates, select freight modes, establish compliance programs, or prescribe negotiation tactics.

What is the difference between target price and target cost?
Target price is the selling price you plan to achieve; target cost is the spending limit derived from that price and your required margin.
For a wholesaler, start with your own net wholesale selling price—not the eventual shelf price. A retailer's planned margin does not belong to the importer. If your starting point is a suggested retail price, first build the channel calculation that converts it into your own expected net revenue.
Use explicit labels on the planning sheet and RFQ. Suppliers may read “target price” as the price you want to pay them, while your commercial team may mean the price charged to your customer. “Target supplier purchase price, per unit, on the stated delivery basis” removes that ambiguity.
| Market-facing target selling price | Used by sales or merchandising for range planning. The commercial owner approves the net selling-price assumption, channel, currency, unit, basis, and date. An approved plan is not proof that customers will pay that price. |
|---|---|
| Target landed cost | Used by buying and finance to protect the planned gross margin. Finance confirms the margin definition and which costs belong in the landed-cost budget. |
| Target supplier purchase price | Used by the buyer to assess quotations and by the supplier to assess feasibility. The buyer approves the ceiling; the supplier separately confirms its offered price and scope. |
| Supplier internal cost target | Used by the supplier's costing and production teams. It excludes the supplier's planned profit and must accommodate the costs of fulfilling the quoted scope. The supplier owns this calculation; the buyer should not present an estimate as a confirmed factory cost. |
How do you calculate the target supplier purchase price?
Calculate the target supplier purchase price by subtracting buyer-paid landed-cost allowances from the landed-cost budget supported by your net selling price and planned gross margin.
Use P for your own net selling price per unit and m for planned gross margin as a share of that selling price. The target landed cost is P × (1 − m). If A represents landed-cost items outside the supplier's quote, the target supplier purchase price T is P × (1 − m) − A.
Keep the boundaries consistent. P should reflect the selling-price deductions used in your financial plan and exclude sales taxes collected for the authorities. A should contain only costs outside the quoted scope that finance assigns to the landed-cost budget. Do not subtract freight, packaging, or tooling again if it is already included in the supplier's unit price.
Gross margin is not markup: margin uses selling price as its denominator, while markup uses cost. If your business uses a contribution-margin model that also deducts selling expenses, label that model explicitly rather than calling the result gross margin.
| Cost bridge | Own net selling price P → subtract planned gross profit P × m → target landed cost → subtract outside-quote landed-cost allowance A → target supplier purchase price T. |
|---|---|
| Supplier-side cost bridge | Target supplier purchase price T → supplier assesses materials, components, conversion, packaging, allocated costs, quoted delivery obligations, and planned profit within that envelope. |
| Quantity-sensitive allocation | If a separately charged tooling or setup amount is allocated per unit, record the allocation quantity and approval basis. Do not assume future repeat orders will absorb the charge unless that assumption is approved. |
Which cost elements belong in the SKU cost-structure map?
| Materials | Buyer or product team specifies the required material and finish; supplier costing identifies the material basis, consumption assumptions, and price inclusion. Start buyer estimates as Buyer assumption; mark the supplier's stated basis Supplier-confirmed when tied to the SKU revision. |
|---|---|
| Components and accessories | Buyer defines the included parts and functions; supplier confirms the bill of materials and bought-in component scope. Identify batteries, accessories, or other separately supplied items explicitly where applicable. |
| Labor and assembly | Supplier owns the process and conversion-cost estimate. Buyer confirms that the quoted construction and functions match the requested specification; do not substitute a buyer labor estimate for supplier confirmation. |
| Tooling and setup | Supplier states the charge, payment basis, and whether it is separate or included per unit. Buyer and finance approve any amortization quantity. Record the charge once, not both in the unit quote and outside-quote allowance. |
| Packaging | Buyer approves the pack format, artwork revision, and included contents; supplier confirms the packaging covered by the offer. Keep packaging changes linked to the same quote revision. |
| Factory overhead | Supplier owns overhead allocation. Request confirmation that the offered price covers the agreed production scope; detailed allocation is needed only where the parties agree to open-book costing. |
| Supplier profit allowance | Supplier owns its profit assumption. The buyer's purchase ceiling includes the supplier's selling margin; it is not a demand that the supplier's manufacturing costs equal the full purchase price. |
| Outside-quote landed costs | Buyer logistics and finance own the allowance and its supporting estimates or invoices. Obtain confirmation from the responsible service provider rather than asking the toy supplier to validate costs outside its scope. |
How should a catalog reference price affect the target?
Use a catalog reference price to screen the budget, not to replace a current, scope-matched supplier offer.
A children's DIY dinosaur science experiment kit has a recorded catalog reference price of USD 3.17 in the October 9, 2026 snapshot. That establishes a dated catalog figure—not an agreed purchase price or a confirmed factory cost.
For a bounded comparison, let T be your approved supplier purchase ceiling from the formula above. If T is below USD 3.17, the reference already sits above your budget: the preliminary gap is USD 3.17 − T per unit. That is a reason to review the price basis and specification, not evidence that the supplier's production costs are excessive.
If T equals or exceeds USD 3.17, the reference passes only the initial budget screen. Send the supplier the requested kit contents, packaging revision, quantity, currency, delivery basis, and treatment of separate charges. Only if the supplier confirms USD 3.17 on that same basis can it be compared as an actual offer against T.
Keep the distinctions visible: the dated reference is a Fact about the catalog; your selling price, margin, and unconfirmed allowances are Buyer assumptions; the current offered price and inclusions become Supplier-confirmed only through the supplier's written response.
What belongs on a one-page target-setting sheet?
| Identity and revision | Enter the buyer's SKU identifier, product description, specification revision, packaging revision, sheet revision, and preparation date. Link the relevant RFQ and supplier quote revisions. |
|---|---|
| Comparable commercial basis | Record currency, unit of sale, order quantity, delivery term and named place, included packaging, separate charges, payment basis, and quotation validity. Buyer specifies the request; supplier confirms its offered basis. |
| Target selling price P | Enter your own net selling-price goal, channel, deductions, supporting reference, and date. Commercial owner approves it. Label forecast inputs Buyer assumption even when internally approved. |
| Margin and target landed cost | Enter planned gross margin m and calculate P × (1 − m). Finance confirms the margin definition, cost classification, and approval date. |
| Outside-quote allowance A | List the included cost elements, per-unit allocation basis, evidence status, responsible cost owner, and date. Keep estimated amounts distinguishable from documented charges. |
| Target supplier purchase price T | Calculate P × (1 − m) − A. Record the buyer's approving name and date. Label it an approved buying ceiling—not a supplier agreement. |
| Supplier offer and cost scope | Record the offered unit price, separate charges, scope exceptions, quote reference, supplier representative, and response date. Attach the SKU-specific breakdown or written offer and mark the applicable inputs Supplier-confirmed. |
| Target versus offer | Compare the offer with T on a matching basis. Record offer minus target as the price gap, and list any unresolved differences in quantity, specification, packaging, or inclusions. |
| Decision and conditions | Record proceed, revise, or hold; the approved price and specification revision; any conditions; and the responsible buyer approver's name and date. Identify any finance or product approval also required. |
| Follow-up closure | Assign each open condition to a named owner with a due date. Close it with a revised quote, written acceptance, or other specified evidence; record the closer and closure date. |
When is the target ready for quoting or sampling?
The target is ready for an RFQ when its calculation and scope are internally approved; it becomes an agreed commercial basis only when the supplier's written response and the buyer's acceptance match.
Send a direct request: “Please quote this SKU against the attached specification and packaging revisions at the stated quantity and delivery basis. Our target supplier purchase price is T per unit. Confirm your offered price, inclusions, separate charges, exceptions, and validity. Identify any proposed change needed to meet the target.”
A SKU-specific cost breakdown can support the feasibility review, but it does not by itself mean the supplier accepts your ceiling. Close commercial confirmation with explicit written acceptance or an offer that the buyer accepts on the same terms. If sampling proceeds before price agreement, record it as conditional and approve the sample charges separately.
When the comparable offer exceeds T, choose the adjustment that addresses the gap: revise the specification and obtain a new quote; revise the selling-price plan with commercial approval; accept a lower margin with finance approval; or hold the SKU. Do not silently raise the target to match the quotation.
Recalculate whenever the specification, quantity, packaging, delivery scope, or cost allocation changes. Preserve the earlier revision and record who approved the new decision and when. The sheet supports traceability; it does not prove supplier capability, prevent undisclosed changes, or guarantee that actual costs will match the plan.